ANR Module General Compatibility
Model M-001 is the “standard” module & fits most headsets.
Model MX-001 module for minimal clearance applications (David Clark 13.x headsets).
Model M-002 is designed for the Peltor series 7000 headsets. Silicone gel ear seals are optional.
Model M-003 is designed to install into any military style helmet.
If you have additional questions, or if your headset is not listed below, please call & inquire about your specific model.
ADI: The M-001-A kit fits models 810.50.
Aircom: See Flightline.
Aircraft Spruce: See Skyline.
Altronics: The MX-001-A kit fits C-9060 and C-9064.
ASA: The M-001-A kit fits all models (HS-1).
Avcomm: The M-001-A fits all. Models AC-900, AC-800, & AC-454 need 5c x-over cable. Also, if the AMP cable is purchased, to retain the push-to-talk feature, factory installation is required.
Aviall/Avix: The M-001-A kit fits all models.
Bose Aviation X: We do not offer kits for this headset.
Communica: The M-002-A kit fits all models.
- H10-XX series use M-001-A.
- H10-13.4 and H10-13S use MX-001-A kit.
- H20-10 requires factory installation and longer installation time.
Dre: Models 1000, 2000, 4000 require factory installation.
Eastern Avionics: The M-001-A fits models Mil-2060.
Falcon: The M-001-A kit fits all models.
Flightcom: The M-001-A kit fits models 4DX & 4DLX. Model 5DX requires the MX-001-A kit. The Denali requires the M-002-A kit and factory installation. Some later Denali cannot be retrofit, call for information We do not fit the Eclipse!
Flightline: The M-001-A kit will fit model HS-60-B.
Gulf/Pacific Coast Avionics: The M-001-A kit fits models GCA-4T & GCA-6T. The GCA-8T requires the M-002-A kit.
*Lightspeed: The QFR series requires the M-002-A kit and factory installation.*
Lynx: The M-002-A fits the Micro-System headsets.
Marv Golden: The M-001-A will fit all except the MG-90.
Mendelssohn: See Pilot Avionics
Peltor: The M-002-A kit will fit the models 7002, 7003, 7004(7000Sport LE), 7005, & 7006. We do not fit any 8000 series or the 7000Pro GT.
Pilot Avionics: The M-001-A kit will fit the PA11-XX series headsets and the P-51, PA12.8S, & PA Cadet. Models PA11-90, PA31-70, & PA31-90 require the M-002-A kit. *PA21-60 requires a hardwired cable and factory installation.*
RST: The M-001-A kit fits all models.
Sennheiser: Model HME-100 requires the M-002-A kit and factory install.
Sigtronics: The M-001-A kit will fit models S-8, S-20, S-40, S-45, S-58, S-65, & S-68. Most are wired in series.
Skyline: The M-001-A kit will fit the Skycom H-40A & the Skypro H-80A.
Softcomm: The M-001-A kit fits all models. Models C-10 & C-60 need a 5c x-over cable. Also, if the AMP cable is purchased, the push-to-talk feature cannot be retained.
Warren-Gregorie: We do not fit any of their headsets.
The M-003-A will fit all SPH-3, 4, and 5, as well as HGU-33, HGU-55, HGU-84, PRK-37, HGU-56, and all military style helmets.
SPH-4 helmet requires factory installation when installing with AMP cable.
Alpha helmets require M-002-A kit with our helmet gel-seals. Factory installation required.
All helmets must have ear cups and ear seals which are not included in the kit.
Silicone gel ear seals for helmets. Outstanding comfort!
If you have additional questions, or if your headset is not listed above, please call & inquire about your specific model.